Equipment for the extraction
and enrichment

Specifications:

• Capacity up to 20 cubic meters / h (depends on the material being crushed and the required size of the pieces at the outlet)
• Jaw system (the maximum size of the crushed material at the entrance 450 × 280 mm)
• Mechanical adjustment of the size of the crushed material at the exit from 20 to 50 mm
• Vibrating hopper with grate screen
• Conveyor for unloading crushed material
• Engine ISUZU 3CD1, diesel, power 21 kW (at 2250 rpm)
• Cooling system
• Metal tracks for movement
• Wired remote control (optional – radio remote control)

Specifications:

• Capacity up to 50 cubic meters / hour (depends on the material being crushed and the required size of the pieces at the outlet)
• Jaw system (the maximum size of the crushed material at the entrance 530 × 400 mm)
• Mechanical adjustment of the size of the crushed material at the exit from 25 to 70 mm
• Vibrating hopper with grate screen
• Conveyor for unloading crushed material
• ISUZU 4LE2 engine, 4-cylinder diesel engine, power 35 kW (at 2500 rpm)
• Cooling system
• Metal tracks for movement

The effectiveness of structural changes to the components of the sintering machine is confirmed by many years of experience in industrial operation:

– worked to a high level kinematic scheme and design;

– mastered technology and high quality manufacturing;

– maximum installation readiness and minimum time for installation, commissioning and achievement of design parameters

AGLOMERATE COOLERS

Cooler circuit Sinter Cooler Scheme linear: 1 – Drive unit 2 – Cloth 3 – Boot Device 4 – Unloading device 5 – Blow chamber 6 – Shelter
A – download B – Air for disposal C – air to clean D – unloading E – cooled agglomerate (on the flyover of the domain Workshops

Advantages of rectilinear coolers from ring, cup, etc.:

• more convenient for the layout of sinter plants;
• simultaneously lifts the agglomerate and transports it to sorting, which allows to reduce the height
  agglomeration corps;
• simplicity of design allows to reduce the cost of maintenance and repair;
• easier implementation of uniform and high-quality sintering, as well as cleaning
  spillage;
• equipment operation for 20 years without replacing the base units and at minimum cost
  repairs.

Rectilinear coolers provide:

• reducing the need for spare parts – up to 100 tons per year;
• air consumption for cooling a ton of sinter – 2000 … 2500 m3
• reduction of downtime for the repair of equipment – up to 5%;
• automation of the process of lubrication of the hinges of the chain of the blade;
• the possibility of utilization of heat from exhaust gases, etc.